i need to buy the dongle for EST3

[bharvey]

Ok, after a lot of searching and reverse engineering I was able (with a lot of help from Lomax) to remove the date problem of the DNG that was handed by lts-maroc, also I was able to remove the disabled features of all the other softwares, (fireworks, honeywell, miretone and EST2 included) here's skch eck result

Key Existance Test: Passed
Key Status Test : Passed
Key Code Test : Passed

Serial Number : 000908

3-SDU : Enabled
> Delete Project
> Save Project
> Import Project
> Export Project
> Compile Project
> Download Project
> Import MicroCode
> Audio
2-SDU : Enabled
> Delete Project
> Save Project
> Import Project
> Export Project
> Compile Project
> Download Project
RDU : Enabled
Honeywell RDU : Enabled
FireWorks : Enabled
> color Text software
ANA-USA : Enabled
ACDB : Enabled
> Stand alone up to 8 doors
EST Specials : Enabled
EST DLL : NOT Enabled

Brand : Edwards Systems Technology


I'm glad to share with anybody, but please, please! Does anybody has the SDU.exe for programming the XLS-1000?

Thanks!

hi sent PM to trade your solution for the XLS1000 option.

regards.

Please help, I also need XLS 1000 option.

Bill

[nag1665]

These File i will join to you contains the file cracked, but need hat you follow these instructions, it works as EST3 Software Key:

1- i tested with XP system
2- Return the date of the system to a Valid from 26/Aug/2010 to 2/Sep/2010, you choose one date .
3- Open the "USB Dongle Backup and Recovery 2012", go the the tab "Driver", then "Install Driver", verify in this tab, in "Driver Statuts "that the driver is installed.
4- Go to the "Emulator" Tab then "Start Service", wait untill it started.
5- Load dump, witch is "1A4B27EB.dng".
6-run your application.
7-Enjoy.


If you want to install a new application of 3-SDU, you have just to repeat from 1---5 , then nstall the application, the PIN code is "EDF5856EEF3CEB93" , please the date is so important to change it before start the operation.

Please go to these URL to download the files: https://rapidshare.com/files/3728587953/1A4B27EB.dng

https://rapidshare.com/files/381519616/ ... up2012.zip

Enjoy.

[nag1665]

File not found

[Nirujan]

hi i need hack software (without hasp key) for firework 1.41 and sdu 5.20 any one can give

[nag1665]

Dear Friends,

I have a solution for you, to avoid any lose of your HASP key, you can dump the key with dongle services, or get a cracked software that can dump it and emulate it when you don't need to use the dongle key.

I leave the company that i worked for, and i use it for my own projects, for maintenances.

Good Luck.


Yassine

hi i have a est3 dongle can you help me to dump my key and without dongle programming methods also.

[cmadradi]

We have tested the new hasps, we were able to make some for all the brands of UTC, the JPEG shows the key tests for the lts-mroc's key he gladly send us. Any trades are available:

Just send PM

[peryp9]

We have tested the new hasps, we were able to make some for all the brands of UTC, the JPEG shows the key tests for the lts-mroc's key he gladly send us. Any trades are available:

hasps.JPG

Just send PM

Hello, I sent you a PM. Any help would be greatly appreciated. Thank you.

[peryp9]

Someone please, I need to clear the Mapping Error on an EST-2 panel. The emulated key posted at the beginning of this thread only gives access to EST-3, but doesn't seem to be enabled for EST-2 panels.

Any help is greatly appreciated. Thank you in advance.

[azhar]

Dear nag,

As suggested I did the following
2- Return the date of the system to a Valid from 26/Aug/2010 to 2/Sep/2010, you choose one date .
3- Open the "USB Dongle Backup and Recovery 2012", go the the tab "Driver", then "Install Driver", verify in this tab, in "Driver Statuts "that the driver is installed.
4- Go to the "Emulator" Tab then "Start Service", wait untill it started.
5- Load dump, witch is "1A4B27EB.dng".
6-run your application.

It worked for that day. When I changed the laptop date to current , it says dates has been reset, kindly set the date. And after that even if I try to set the date to 26 Aug 2010. It shows the same message.
I tried to uninstall and again reinstall the driver. In emulator it says driver installed. But when I try to start the service it does not start at all. I tried it many times but it did not work.
Kindly suggest what to do.

[azhar]

Hi,

After installing USB Dongle Backup and Recovery 2012 and running the services, when loaded the dump it shows the error.

screen shot attached.

Kindly help.

regards

Azhar