EST3 to BMS Communications Bridge

Post Reply
avish
Posts: 1
Joined: Sun Oct 08, 2017 8:11 pm

EST3 to BMS Communications Bridge

Post by avish »

Hi All

I am in desperate need of assistance to set up the BACnet IP configuration for the EST to BMS communications bridge. I have gone through several different configurations but don't seem to be getting any closer to success.

I have attached the gateway export of the logical addresses from the SDU (points required highlighted) and the default config from the bridge. Any assistance would be greatly appreciated.
Attachments
08-10-2017_BMS_DefaultConfig.csv
(19.27 KiB) Downloaded 482 times
07-10-2017 FNB_DC2.CSV
(6.34 KiB) Downloaded 501 times
Top
Nirujan
Posts: 68
Joined: Thu Sep 26, 2013 8:42 am

Re: EST3 to BMS Communications Bridge

Post by Nirujan »

HI could you attach your sdu file I will work out and give you.
Top
Post Reply

Return to “EST3”