Hi,
did you want restart each panel separatlly or each fireworks station will be reset all panels?
Search found 25 matches
- Wed Mar 05, 2014 3:34 am
- Forum: FireWorks
- Topic: Fireworks nodes
- Replies: 1
- Views: 2928
- Mon Oct 15, 2012 1:25 am
- Forum: EST3
- Topic: EST loop addressing procedure
- Replies: 10
- Views: 10676
Re: EST loop addressing procedure
add the devices to the loop offline with address what you whant; delete not used address.
upload the loop add assign device s/n to the address you whant.
upload the loop add assign device s/n to the address you whant.
- Mon Sep 26, 2011 10:47 pm
- Forum: EST3
- Topic: network problem
- Replies: 2
- Views: 3264
Re: network problem
Which network you use ( cooper or fiber)?
- Mon Sep 26, 2011 10:37 pm
- Forum: EST3
- Topic: SIGA-PS near Halogen light
- Replies: 2
- Views: 3428
Re: SIGA-PS near Halogen light
Yes, you right the lights cause to faults and false alarms! You have 2 options or relocate the detector or lights( addition try to rotate the lights 180 degree, then the starter change it place and will decides you problem).
- Wed Mar 30, 2011 4:11 pm
- Forum: EST3
- Topic: bad type detector
- Replies: 3
- Views: 11848
Re: bad type detector
It's also can be result of shaky contact when the siga-led disconnected from the base therefore you the base type changed and you receive bad type trouble.
- Thu Feb 10, 2011 8:38 am
- Forum: EST3
- Topic: Mapping Error
- Replies: 8
- Views: 8228
Re: Mapping Error
Hi, Ahmed! You have same problems in wiring, try check: 1. you line resistance by short of the EOL should be not more 100Ohm 2. if you use class A conect it as class B and then open line between 74 and 75 devices if you map not failed start add devices one by one until you find the problem. Update ...
- Wed Dec 15, 2010 6:19 am
- Forum: EST3
- Topic: USB to RS232, SDU connect to FACP
- Replies: 7
- Views: 7310
Re: USB to RS232, SDU connect to FACP
Hi,
I try many USB to RS232 converters, but only one work correct with all systems that I am work.
It's Aten UC-232A it also compatible with Win7 if you need.
I try many USB to RS232 converters, but only one work correct with all systems that I am work.
It's Aten UC-232A it also compatible with Win7 if you need.
- Sun Nov 21, 2010 9:38 am
- Forum: EST3
- Topic: Mapping Error
- Replies: 8
- Views: 8228
Re: Mapping Error
Hi, Ahmed! You have same problems in wiring, try check: 1. you line resistance by short of the EOL should be not more 100Ohm 2. if you use class A conect it as class B and then open line between 74 and 75 devices if you map not failed start add devices one by one until you find the problem. Update m...
- Sun Oct 10, 2010 7:01 am
- Forum: EST3
- Topic: linear heat control panel
- Replies: 1
- Views: 2964
Re: linear heat control panel
Hi,
As I remember you can connect it to the CT1 with EOL resistor and test it with resistor short.
As I remember you can connect it to the CT1 with EOL resistor and test it with resistor short.
- Thu Aug 26, 2010 6:47 am
- Forum: EST3
- Topic: problem printing the mapping to a pdf file
- Replies: 1
- Views: 3103
Re: problem printing the mapping to a pdf file
download and install primoPDF from www.primopdf.com
and you will be able print to PDF
Good Lack,
MikBZ
and you will be able print to PDF
Good Lack,
MikBZ