TheAlarmTech.com

Hi Sam,
I couldn't understand what you mean exactly by removing battery cycle power , can you explain?

Thanks,
Reza

Hi Friends, During a download to EST-3 CPU, the PC reset and the download broke, now the LCD is not showing anything, also "CPU Fail" led is light on. I try to reset the panel by pressing reset button, but the front keypad is also not working. I severally cut off the AC and battery and tur...

I can download/uploade to SDDC1 card directly from it's RJ jack. I can download/uploade to SDDC1 card from CPU J5 jack. I can also upload the mapping of SDDC1. But finally no detectors/modules shown the mapping, and also there are Data Card Fault 1, 2. Also my SDDC1 card doesn't have 24Vdc at loop t...

1,SDU 3.6 CPU default setting is 3-cpu3,please change it into 3-cpu1. Yes, I have changed to 3-CPU1 2,after you configured the hardware settings,please compile and db conversion all Yes, I have converted 3,make sure your SDDC1 card hardware you have installed completely.Notice the two small cards(SD...

Hi all, I am powering up an EST3 cabinet for the first time, the hardwares are: 3-CAB5 3-CPU1 3-PS/M 3-SDDC1 3-LCD I have configured the above hardwaresin 3-SDU 3.6 and downloaded to the panel by connecting to CPU connector J5. When download is finished there are two faults on LCD: Data Card Fault 1...

Thanks,
I don't have the coad loader for QS1, would you please send them to me and let me know step by step what to do?

Thanks,
Reza
reza@esmaeili.ir

If I use the code leader to load the CPU microcode again to CPU then what will happen to the current rules and data available on panel? I don't want to lose the current rules and data available on panel.
Thanks,
Reza

Thanks Mikbz!

Thanks Leo, It has been written in the manual that NETCON-INS Configuration Software is also required to enter a static IP address, set up port, protocol and data handling configurations. There is a free software in the internet called NetCon 4.04 http://www.brothersoft.com/netcon-159561.html Is it ...

Hi! I have three EST3 RS232 networks in bulidings A, B and C which are about 50km far from each others. Only building A has fireworks. I want to connect buildings BC to my fireworks too. Each building has a LAN computer network, A is connected to B via fiber optic but A&B are connected to C via ...