TheAlarmTech.com

For walktest to function I was told it has to be programmed into the panel. Anyone have any info and/or instructions on how to go about programming the panel so walktest can used?

Can this panel have a remote reset from an addressable input module or hardwired circuit?

non firelite or silent knight panel.
will the EG1M-RM allow multiple NAC circuits to be synchronized if they're daisy chained together (per the drawings) or will they only sync the devices on their respective circuits?

Have an existing EST quickstart that is to be replaced with a non EST product. The horn-strobes are EST Genesis series and are to remain. What options are available to sync multiple NAC circuits without changing all the horn-strobes. I thought I saw a conventionally wired synchronization module from...

Anyone know if the EST ESA 2000 (and the re-branded Mirtone M2000) fire panels can have the NAC outputs on the main board set as steady output for connecting strobes? From my reading in the manual the panel is set to pulse at 120 PPM (pulses per minute?) as default. It doesn't say in my manual how t...

Hello, Just wondering if anyone knows and/or has tried using parts from a Fire-lite Sensican 2000 in a Notifier 2500 panel. The configuration and parts all look the same, but I'm guessing they probably have different part numbers. I would like to use a detection card and relay module from a spare Se...

Hello, Just wondering if anyone knows and/or has tried using parts from a Fire-lite Sensican 2000 in a Notifier 2500 panel. The configuration and parts all look the same, but I'm guessing they probably have different part numbers. I would like to use a detection card and relay module from a spare Se...

Got it all clear. Turned out to be a bad card in the annuciator specifically the RAI card which is the one that the wiring connects to from the main panel for power and communication. Replaced it, re-loaded the database and it still showed the ANN 02 LED/switch display. Checked the programming and t...

Also the panel now showing ANN 02 LED/switch display trouble doesn't show the ANN CH02 communication trouble anymore.

I'm leaning towards a hardware fault in either the annunciator or panel itself. Anyone with any thoughts?

no link to click on the attachment. I'm assuming your looking for the barrel key? Not sure where to get them to be honest. They're always left with the panel. Sometimes I find them sitting inside the panel.