TheAlarmTech.com

doesn't exist.

pretty sure there is no front panel programming on these. you need the software

you have to call tech support, they have an algorithim that works with the time and date set on the panel that can decode it. (Password of the day)

could be a display/membrane error. need laptop and software to diagnose

if you don't have the level 2 password, the only way to get in is to contact tech support, they can give you an unlock code. You will need to be a dealer or have authorization from one.

FCI 7100 Install manual

you do not need laptop or software, just need to program the replacement device. If you don't have a device programmer, usually whoever you get the part from can set the address it needs to be for you prior to shipping.

Amplifiers are being overdriven. Check your gain on each amp. Also could be too many watts pulled.

FS-100 Software


http://firedefense.myqnapcloud.com:8080 ... id=0Af1nW2

You will have to go to the objects screen and go to the loop in question, set the "mapping disabled" point to "no cabinets"